Share:
A device that is designed to automatically activate the fire suppression system release sequence when fire is detected.
Standard Features
Standard Features
- Power Source Indicators
- Power Failure Indicators
- Zone Fire, Fault and Isolate Indicators
- Bell Isolate Switch and Indicator
- Gas Isolate Switch and Indicator
- Fault Buzzer Mute Switch
- Master Reset Switch
- Test Lamp Switch
- Test Battery Switch
- Earth Fault Supervisory
- Built-in Delay Discharge Timer (Programmable)
New Features
- GAS Abort Function (Optional)
- Digital Voltmeter and Ammeter
- Intelligent Battery Charger
- Digital Countdown Timer
- Common Fault Contact
- Low Pressure Indicator
| SIZE | ||||
| No. of Zones | Model No. | Part No. | Size (mm) (W x D x H) | |
| Indoor | Outdoor | |||
| 2 | PE-GRP 200i / PE-GRP 200s | FAP-02ZCP-N | 430 x 370 x 170 | 430 x 380 x 170 |
| 4 | PE-GRP 400i PE-GRP 400s | FAP-04ZCP-N | 550 x 390 x 170 | 550 x 400 x 170 |
| TECHNICAL DATA | ||||
| Power Supply Input | 240V AC 50Hz/60Hz | |||
| Operating System | 24V DC | |||
| Operating Battery | 18-27.6V DC | |||
| Battery Cut Off | 18V | |||
| Intelligent Charger (S1) | 0.67A – 1.3A @ 30% | |||
| Intelligent Charger (S5) | 1.2A – 1.8A @ 100% | |||
| End of Line | 8K2 Ohms | |||
| Auxiliary Output | 24V, 2 Amp | |||
| Alarm Signal | N/O Contact | |||
| Gas Discharged Signal | N/O Contact | |||
| STANDBY MODE | ||||
| Master | 75mA | |||
| Per zone (with Detectors) | 5mA | |||
| Flashing Lights (Green LED) | 75mA | |||
| ALARM MODE | ||||
| Master | 140mA | |||
| Per Trigger Zone | 70mA | |||
| Output Devices | 200mA | |||
| Flashing Lights (Red LED) | 75mA | |||
| Per Bell | 30mA | |||
*Applicable for Carbon Dioxide Extinguishing System
Inquiry - Auto Gas Releasing Control Panel
